장비통합 검색/신청

장비상세보기

블레이드피로하중시험기

FATIGUE TEST SYSTEM

  • 시설장비활용번호 : Z-202006045467
  • 시설장비등록번호 : NFEC-2012-03-156894
  • 활용범위 : 공동활용서비스
  • 활용대상 : 기관외부활용
  • 예약방법 : 실시간예약
  • 관심장비등록 카달로그 메뉴얼
문의번호 ( 한국재료연구원 )
  • 예약문의 055-280-3722
  • 장비문의 055-280-3722
  • 장비활용중개소
    (ZEUS)
    1670-0925 ※ 운영시간 (09:00~18:00)
이용 요금
  • 이용요금 * 장비이용료는 상세 활용 내역에 따라 달라질 수 있으며, 장비 사용 전 장비관리자가 사용을 위한 사전 협의 후 장비사용통보서를 발송함.(장비사용통보서에 장비 이용 금액이 기재됨)
  • 이용료 안내 * 장비이용료는 상세 활용 내역에 따라 달라질 수 있으며, 장비 사용 전 장비관리자가 사용을 위한 사전 협의 후 장비사용통보서를 발송함.(장비사용통보서에 장비 이용 금액이 기재됨)
  • 이용방법 1. (신청자) ZEUS 예약사이트 접속 2. (신청자) 공동활용장비 검색 3. (신청자) 연구장비 예약 신청 4. (한국재료연구원) 예약목록 확인 및 접수 5. (한국재료연구원) 장비사용 이상 여부 확인 후 장비사용통보서 발송_사용료 등 기재 6. (신청자) 통보서 확인 후 장비 사용(직접 또는 의뢰) 7. (신청자) 결과확인 및 이용료 정산
  • 제작사명 ㈜케이엔알시스템
  • 모델명 모델명 없음
  • 구축일자 2011-11-15
  • 사용용도 분석
  • 탄소공정 시험/평가
  • 5대수요산업 에너지환경
  • 6대 탄소소재 탄소섬유
  • 설치장소 신재생에너지소재개발지원센터 풍력시험동
사용/활용예
  • 사용/활용예
  • 장비설명 I. System Overview ● The blade static & fatigue test system is for performing static and fatigue tests of wind turbine blades whose maximum span length is 66m. ● The static test system consists of five independent winches subjected to horizontal loads and one independent controller. ● The fatique test system consists of two actuators and one independent controller. The actuators operated by hydraulic power must be performed by one of the two actuating methods such as resonance excitation and direct load displacement or combination of them. ● The fatique test must be capable of testing wind turbine blades to dual-axis direction as well as single-axis direction including flap-wise and edge-wise direction.
  • 구성 및 성능 Winch system for static test The static test system must be capable of performing a static test of a blade with maximum 66m to horizontal direction. The winch system consists of five winches that could be independently installed and controlled. The winch assembly is free to move using a crane in a test building according to blades length and should be capable of setting up its face direction and then mounting itself on the buildings strong floor. Must design and manufacture it to be fixed 1m apart from a T-slot floor. The load transmitted on the floor should be sealed and compressed (without any bending load) in a truss form design. The load height can be adjusted. Sufficient wire length considering blades maximum deflection. The winches include devices such as a torque limiter over-speed protector in order to prevent ove