장비상세보기
문의번호 ( 한국생산기술연구원 )
- 예약문의 041-589-8573
- 장비문의 041-589-8573
-
장비활용중개소
(ZEUS) 1670-0925 ※ 운영시간 (09:00~18:00)
이용 요금
- 이용요금 협의후 결정
- 이용료 안내 협의후 결정
- 이용방법 담당자협의
- 제작사명 Kyoto Electronics Manufacturing(KEM)
- 모델명 TPS-500S
- 구축일자 2014-05-19
- 사용용도 시험
- 탄소공정 시험/평가
- 5대수요산업 모빌리티 ,에너지환경 ,라이프케어 ,방산·우주·항공 ,건설
- 6대 탄소소재 탄소섬유 ,활성탄소 ,인조흑연 ,카본블랙,탄소나노튜브,그래핀
- 설치장소 첨단하이브리드생산기술센터 신뢰성평가시험실
사용/활용예
- 사용/활용예
- 장비설명 1.1. Thermal Conductivity : 0.03 to 100 W/mK using standard isotropic method 5 to 200 W/mK using slab or one-dimensional methods 1.2. Thermal Diffusivity : 0.02 to 40 mm2/s using standard isotropic method2 to 100 mm2/s using slab or one-dimensional methods 1.3. Specific Heat Capacity : 0.10 to 4.5 MJ/m3K 1.4. Measurement Time : 2.5 to 2560 seconds 1.5. Reproducibility : 2% (thermal conductivity) 10% (Thermal diffusivity sensor radius 6.4mm)12% (Volumetric specific heat sensor radius 6.4mm) 1.6. Accuracy : Better than 5% (thermal conductivity) 1.7. Temperature Range : -100℃ to 300℃Core Instrument AmbientWith Furnace Ambient to 300℃ With Circulator -35℃ to 200℃ 1.8. Power Requirements : Adjusted to the line voltage in the region of use 1.9. Smallest Sample Dimension : 3mm x 8mm diameter or square for bulk testing 0.1mm x 12mm diameter or square for slab testing 10mm x 5mm diameter or quare for one-dimensional testing 1.10. Sensor Types Available : Kapton insulated sensors 7577 (radius 2.0mm)5465 (radius 3.2mm) and 5501 (radius 6.4mm) With or without cable
- 구성 및 성능 1. Sensors : The instrument operates a wide variety sensors suitable for different materials(solid powders pastes gels and high-viscosity liquids) dimension and applications. 2. Temperature Control : Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or Liquid-Temperature Bath. The test & measurement software and the thermal constants analyzer controls the external device through a USB Port on the rear of the instrument. 3. Optional Software Modules : In addition to the Standard Module (SLAB 1-dim) optional software modules for SPECIFIC HEAT CAPACITY is available 4. NO Interface liquid between sensor & sample requires. 5. NO OEM calibration requires. 6. Meets ISO Standard 22007-2 with revised electronics
